DEWALT DW716 15 Amp 12-Inch Double-Bevel Compound Miter Saw is The Best Miter Saw?

  • The 15 amp motor can produce 3600 rpm making the saw powerful and durable.
  • The adjustable miter detent plate is made of stainless steel and has 11 positive stops can improve productivity while ensuring accurate cuts.
  • The miter system is precise, and the machine base fence support improves cutting accuracy.
  • The design of the belt drive and gearbox increases the vertical cutting capacity.

DEWALT DW718 12-Inch Double-Bevel Slide Compound Miter Saw

  • Improved durability and power is provided by the 15 amp motor that can produce 3600 rpm.
  • The miter detent plate has ten positive stops and is made from stainless steel. It can be adjusted. It will improve productivity by ensuring accuracy in the cuts.
  • Cutting accuracy is improved by the machined base fence support and the accurate miter system.
  • Vertical cutting capacity is enhanced thanks to the design of the belt drive and gearbox.

DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw

  • The 15 amp motor is powerful and durable. It produces 4000 rpm.
  • 11 positive stops are present in the adjustable miter detent plate that improves productivity and accuracy of the cuts. It can be adjusted.
  • The machined base fence support and the precise miter system enhances cutting accuracy.
  • The range of bevels is from 0 to 48 degrees left and 0 to 3 degrees right. The miter capacity can be angled from 0 to 50 degrees either side.

DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw

  • XPS crosscut positioning system is integrated.
  • Increased power and durability offered by the 15 amp motor that produces 3800 rpm.
  • A special design allows lumber of 2 by 16 to be cut at 90 degrees. At 45 degrees, two by 12 can be cut.
  • Ten positive stops present on the adjustable miter detent plate made of stainless steel to improve accuracy and productivity.
  • The dust collection system can eliminate more than 75% of dust.
  • A stand is not provided.

Makita LS1216L 12-Inch Dual Slide Compound Miter Saw

  • Accuracy of cuts improved by six linear ball nearing and a 4-steel rail sliding system.
  • A special dual sliding fence system allows fence adjustments both ways.
  • The low maintenance direct-drive motor produces 15 amps and 3200 rpm.
  • The laser operates independently.

Hitachi C10FCE2 15-Amp 10-inch Single Bevel Compound Miter Saw

  • The angle range of the miter is 0 to 52 degrees both ways for enhanced flexibility.
  • The extended flip fence can be raised to 4”.
  • The bevel range is 0 to 45 degrees on the left with adjustable stops for accurate cuts.
  • The elastomer grip increases comfort and control of the horizontal handle.

Makita LS1016L 10-Inch Dual Slide Compound Miter Saw with Laser

  • The 4-steel rail type of sliding system can increases stability for better cuts.
  • A total of six linear ball bearings.
  • The powerful motor produces 15 amps and 3200 rpm. Its direct drive system needs less maintenance.

Bosch 5312 12-Inch Dual Bevel Slide Compound Miter Saw

  • The range selector knob and bevel lock lever can be easily accessed.
  • The base has cast sliding extensions built into it to offer a total length of 40 inches.
  • The miter scales and bevel can be read quickly.
  • The 15 amp engine requires 120V.
  • Electric brake allows the blade to be stopped in seconds.

Hitachi C10FCH2 10-Inch Miter Saw with Laser

  • Large pivoting fence
  • Laser marker
  • The carbon brush can be accessed externally.
  • The large table allows the material to be supported better.
  • The 15 amp motor provides enough power even for tough cuts.

Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw

  • The patented system for axial-glide enhances precision.
  • The cutting capacity is extensive with a horizontal capacity of 14 inches and vertical capacity of 6.5 inches.
  • The bevel and miter scales are large enough to be read easily. Detents and roof pitch angles are clearly marked.
  • The Square lock fence is highly precise and does not need any adjustment.
  • The ergonomic trigger handle can be used with both hands and is very comfortable.

There are many wood crafting situations that require accuracy and precision in crosscuts and miters. In such cases, you will not find a better tool for your work than miter saws. These saws are now more advanced than the earlier chop saws. A good miter saw can help you work faster while ensuring a better accuracy whenever you want to execute complex miter cuts.

 

For home improvement and DIY projects, you are bound to need a miter saw sooner or later. Of course, if all you need to do is a few necessary cuts, then a handsaw will be enough. However, a miter saw will help you accomplish more advanced cuts quickly.

 

DeWalt DW715 Review - The Best Miter Saws

DeWalt DW715 Review

Purchasing a miter saw will be worth the investment. It can help save time on your projects by completing cuts faster. In fact, miter saws are a must-have power tool for any serious woodworker. Of course, these tools are rather expensive. Due to their higher cost, it becomes essential that you put a bit of thought into the purchase. The best miter saws reviews & buying guide can be of help in this matter.

 

Understand What Kind of Miter Saw You Need

One of the most crucial steps in purchasing a miter saw is understanding that one of them will suit your needs perfectly. After all, each miter saw comes with its set of features and problems. Each miter saw will have one function that it can perform better than the others in the market. Therefore, you need to get a miter saw capable of fulfilling your requirements.

 

The easiest way to determine the suitability of a miter saw is by browsing through its specifications. After checking finding a suitable miter saw, the next step is to go through the user reviews. Many websites have such reviews including shopping sites such as Amazon. If the reviews are positive, you are closer to making a purchase.

 

However, you need to understand your requirements before progressing any further. You need to determine how the saw will be used and what projects you hope to accomplish with it. A cheap saw will be enough for small projects. On the other hand, a larger and more expensive saw will be needed if you want to undertake complex renovation projects. Avoid buying a saw simply due to its price as you may later realize that it lacks a feature that you need.

 

Understanding Miter Saws

The purchase of a miter saw should be dependent on your needs. A sliding miter saw would be suitable for cutting through wide boards as the blades can be set quickly. Double bevel type of sliding miter saws will be useful when you need to angle the blade during cuts. These saws are more versatile, and you can use them to make angled cuts. If you are planning to create moldings or trimmings, the double type will be a better choice.

 

Features of Miter Saws

A miter saw can have some features, some of which may not be present in all models. Understanding these characteristics and their uses will help you understand which saw will be best suited for your need and project.

 

The Laser Guide

Most of the best miter saws will have a laser guide. This component acts as a visible indicator of where the cut will land on the item under the current settings. For purposes of accuracy, the presence of a laser guide is invaluable. While a single guide is standard, certain saws do have two guidelines for indicating the complete kerf width.

 

The Blade Safeguard

It is essential to opt for a miter saw that offers a blade safeguard. This component can provide a protective layer on the blade teeth. The latest saws tend to feature an automatic retracting blade guard. The guard will automatically retract when the miter saw is being placed over an item. Conversely, the guard will cover up the blade once the saw is raised. In the absence of a blade guard, it can be quite dangerous to work with the saw.

 

The Dust Bags

Dust bags can be attached directly to the saw. As the name suggests, this bag will gather the sawdust produced during cuts. Alternately, some manufacturers provide adapters for the same purpose. A vacuum cleaner can be attached instead of a dust bag so that more dust can be collected. Disposal is easier in these cases as well.

 

The Cutting Capacity

The majority of miter saws have a cutting capacity of 10 inches or 12 inches. Most users will find these standard capacities to be quite sufficient for their work. However, there are miter saws that have a larger or smaller cutting capacity. They are meant only for those users who specifically need such a capacity in their work. While a cutting capacity of 12 inches is better, it also makes the saw more expensive and heavy.

 

The Blade Size

The size of the blade can make an enormous difference to the functionality and usability of the miter saw. The common blade sizes used in these saws are 10 inches and 12 inches. A blade of 12 inches will be a good choice if you need to cut through thicker materials. However, they are costlier. You will find the 10-inch blade to be enough for most typical projects.

 

The Miter Index

For any miter saw, one of the most crucial features is the miter index. This index allows you to adjust the position of the blade of the saw according to the fence. Most miter saws have a miter index that allows you to perform accurate adjustments in one-degree increments. However, there are also miter saws with an index that contains stops. These stops are marked by mutual angles such as 30 degrees, 45 degrees or 15 degrees. You will find it easier to adjust to these standard angles thanks to the presence of the stops.

 

The most important consideration while purchasing any miter saw will be the user

The most important consideration while buying any miter saw will be the user. After all, it will be your use that determines whether the saw is capable of fulfilling what you need from it. Discover the facts such as the work area the saw will be used in, the frequency of use, the type of cuts required and the projects you hope to fulfill with it amongst others. You also need to establish the budget you wish to allocate for the purchase.

 

The Types of Miter Saws – The Best Miter Saws

There are quite a few types of miter saws. You should know more about the various types available if you want to ensure that you get the best miter saw for your needs.

  • Regular Miter Saws

This saw will have a fixed vertical pivot and a rotating cutting table. This enables you to perform mitered cuts. The blade will always remain vertical in these saws.

 

  • Compound Miter Saws

In these saws, the vertical pivot can rotate which allows the cutter head and the saw blade to be tilted or beveled on its sides. Additionally, the table can turn horizontally. With these saws, you can accomplish cuts that are angled vertically and horizontally. Additionally, the cuts can be angled in both the planes if required.

 

  • Sliding Compound Miter Saws

These saws can be considered to be a compound miter saw on which horizontal sliding arms have been attached to the cutter head. This allows you to cut through boards with a significant width.

 

  • Dual Compound Miter Saws

At first glance, these saws can seem similar to sliding compound miter saws. However, in these saws, the blade as well as the motor is capable of tilting sideways. This enables you to saw the material at advanced angles. You will find it easier to craft crown molding with this saw, for example.

 

Comparisons between Miter Saws – the best miter saws

 

DEWALT DW716 15 Amp 12-Inch Double-Bevel Compound Miter Saw

  • The 15 amp motor can produce 3600 rpm making the saw powerful and durable.
  • The adjustable miter detent plate is made of stainless steel and has 11 positive stops can improve productivity while ensuring accurate cuts.
  • The miter system is precise, and the machine base fence support improves cutting accuracy.
  • The design of the belt drive and gearbox increases the vertical cutting capacity.

 

DEWALT DW718 12-Inch Double-Bevel Slide Compound Miter Saw

  • Improved durability and power are provided by the 15 amp motor that can produce 3600 rpm.
  • The miter detent plate has ten positive stops and is made from stainless steel. It can be adjusted. It will improve productivity by ensuring accuracy in the cuts.
  • Cutting accuracy is improved by the machined base fence support and the accurate miter system.
  • Vertical cutting capacity is enhanced thanks to the design of the belt drive and gearbox.

 

DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw

  • The 15 amp motor is powerful and durable. It produces 4000 rpm.
  • 11 positive stops are present in the adjustable miter detent plate that improves productivity and accuracy of the cuts. It can be adjusted.
  • The machined base fence support and the precise miter system enhances cutting accuracy.
  • The range of bevels is from 0 to 48 degrees left and 0 to 3 degrees right. The miter capacity can be angled from 0 to 50 degrees either side.

 

DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw

  • XPS cross cut positioning system is integrated.
  • Increased power and durability offered by the 15 amp motor that produces 3800 rpm.
  • A unique design allows lumber of 2 by 16 to be cut at 90 degrees. At 45 degrees, two by 12 can be cut.
  • Ten positive stops present on the adjustable miter detent plate made of stainless steel to improve accuracy and productivity.
  • The dust collection system can eliminate more than 75% of dust.
  • A stand is not provided.

 

Makita LS1216L 12-Inch Dual Slide Compound Miter Saw

  • The accuracy of cuts improved by six linear balls is nearing and a 4-steel rail sliding system.
  • A unique dual sliding fence system allows fence adjustments both ways.
  • The little maintenance direct-drive motor produces 15 amps and 3200 rpm.
  • The laser operates independently.

 

Hitachi C10FCE2 15-Amp 10-inch Single Bevel Compound Miter Saw

  • The angle range of the miter is 0 to 52 degrees both ways for enhanced flexibility.
  • The extended flip fence can be raised to 4”.
  • The bevel range is 0 to 45 degrees on the left with adjustable stops for accurate cuts.
  • The elastomer grip increases comfort and control of the horizontal handle.
  • The carbon brush can be replaced.

 

Makita LS1016L 10-Inch Dual Slide Compound Miter Saw with Laser

  • The 4-steel rail type of sliding system can increase stability for better cuts.
  • A total of six linear ball bearings.
  • The powerful motor produces 15 amps and 3200 rpm. It’s direct drive system needs less maintenance.

 

Bosch 5312 12-Inch Dual Bevel Slide Compound Miter Saw

  • The range selector knob and bevel lock lever can be easily accessed.
  • The base has cast sliding extensions built into it to offer a total length of 40 inches.
  • The miter scales and bevel can be read quickly.
  • The 15 amp engine requires 120V.
  • Electric brake allows the blade to be stopped in seconds.

 

Hitachi C10FCH2 10-Inch Miter Saw with Laser

  • Large pivoting fence
  • Laser marker
  • The carbon brush can be accessed externally.
  • The large table allows the material to be supported better.
  • The 15 amp motor provides enough power even for tough cuts.

 

Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw

  • The patented system for axial-glide enhances precision.
  • The cutting capacity is extensive with a horizontal capacity of 14 inches and vertical capacity of 6.5 inches.
  • The bevel and miter scales are large enough to be read easily. Detents and roof pitch angles are clearly marked.
  • The Square lock fence is highly precise and does not need any adjustment.
  • The ergonomic trigger handle can be used with both hands and is very comfortable.

 

Miter saws have become rather advanced. At the same time, manufacturers have tried to keep prices down. It will; not be too difficult for you to get a high-quality miter saw that can fall into your budget. At the same time, you can try to locate discounts for a better deal.

You could increase the value and appeal of your home by installing wood flooring. While wood flooring installations are time intensive, the right tools could make them much easier. Ensuring your hardwood boards are cut to specifications is among the most crucial aspects of a project. Regardless if you repair a segment of your wood flooring or install new floor, having the appropriate cutting tools is essential to an effective project. A miter saw is among the best tools for cutting wood flooring. Miter saws allow you to make exact cuts in the wood since they help keep the wood in position although it is cut.

A 10 inches or 12 inches miter saw is suitable for most wood flooring jobs, particularly if there are not many corners and bends to be cut. A typical 40 tooth wood cutting blade is sufficient for a miter saw to be able to cut wood flooring. Miter saws vary in price from about $120 to over $500. ) For jobs that involve cutting broader boards of wood or those to get which angled cuts are required, a sliding compound miter saw is just the most intelligent choice. A 10 inches sliding compound miter saw may cut wood widths of nearly 1 base, and it provides the user the capability to lock a plank into place so the cut is just straight.

Sliding compound miter saws can also be useful tools for cutting specific pieces of wood for stairs. Sliding compound miter saws usually start at around $250. A jigsaw is typically utilized in wood flooring installations and repairs when little, precise cuts are needed around items like heating, ventilation and AC vents and electrical outlets. Jigsaws are also made of handy when cutting baseboard, molding along with other smaller wood pieces. Smaller jigsaws may be found for under $50, but for any wood cutting, more strong saws that provide at least 5 amps are needed. Almost any wood flooring job involves cutting around a door. An essential tool for cutting the trim items around doors is a jamb saw.